Skip to content
Book a demo

AI video analytics for existing CCTV

One platform. Every camera. Total intelligence.

AI on the cameras you already have — analysed on-site, with alerts in under 2 seconds and plain-English search across every camera.

Book a demo
  • Live in schools across NSW & Victoria

  • Live in manufacturing facilities in NSW

  • 15+ AI detection models

  • Alerts in under 2 seconds

The camera network already exists. Optara Systems adds the intelligence layer.

Most sites have more cameras than anyone could watch. Optara Systems puts AI on every feed you already run, around the clock.

How Optara Systems works on site: six existing cameras — Gate, Car park, Corridor 3, Reception, Loading dock and Stairwell B — stream video over your local network (RTSP / ONVIF) to the Optara Systems edge device installed at your premises. Analysis happens on that device, so your camera streams aren’t sent off-site to be analysed. When something needs attention, such as someone entering a restricted zone or a vehicle loitering, the alert and a short clip appear on the Alerts page of the Optara Systems console, on a desk or on a phone.
  • Keeps your cameras

    Connects to the IP cameras and NVRs you already run, over ONVIF or RTSP. Nothing is replaced.

  • Thinks on-site

    AI runs on a compact edge device at your site, so camera streams aren’t sent off-site to be analysed.

  • One console

    Alerts, search and insights across your cameras, in one place.

  • Built in Sydney

    Designed and supported by the Optara Systems team in Sydney, with Australian sites in mind.

Detect. Search. Alert. Understand.

AI on an edge device at your site. One console for what your cameras see.

Optara Systems counting people through lobby turnstiles, with a virtual line drawn across the entrance

01 — Detect

Every camera, watched at once.

AI detection models run on the Optara Systems edge device, watching for people, vehicles, safety events and security risks on the cameras you choose.

  • People and vehicles, counted by direction
  • Restricted zones and virtual lines
  • Running 24/7, on-site
Explore Human & Vehicle Counter
The Search page of the Optara Systems console, ready for a plain-English description of what to find

02 — Search

Find any moment in plain English.

Type what you’re looking for, like “white van near the gate”, and get timestamped clips from across your cameras.

  • No query syntax, no training
  • Filter by time range and camera
  • Results ranked by match score
Explore AI Search
A café after closing, seen from a ceiling camera: the kind of scene Optara Systems watches for after-hours movement

03 — Alert

Know in under 2 seconds.

When a fall, an after-hours intruder or a watch-listed vehicle is detected, the alert and a short clip appear in the Optara Systems console.

  • Clip, camera and time on every alert
  • Rules set per camera, zone and schedule
  • Acknowledged and tracked in one place
Explore Perimeter Protection
Optara Systems measuring visitors, waiting time and staffing at a café counter throughout the day

04 — Understand

See how your site really runs.

Counts, queues and heatmaps turn everyday footage into insights for staffing, layout and safety decisions.

  • Visitor counts and busy periods through the day
  • Queue length and wait-time alerts
  • Where people move, linger and crowd
Explore Peak Period Detection
Book a demo

15 solutions

Choose what you need to see.

Security, safety and operations solutions that run on the Optara Systems edge device and console. Start with the ones your site needs.

Security officer at a desk with CCTV monitors, taking a call

Tuned to the way your site works.

Schools, factories, shop floors and car parks. Optara Systems is set up around how each site runs.

Analysed where it’s recorded.

Analysis happens on-site, on the Optara Systems edge device — your camera streams aren’t sent off-site to be analysed. When something needs attention, the alert and a short clip appear in the Optara Systems console.

  • Processed on-site

    AI inference runs on the edge device on your own network, right next to your cameras.

  • No streaming to the cloud for analysis

    Camera streams are analysed where they’re recorded, instead of being sent away for processing.

  • Your cameras, unchanged

    Connects to existing IP cameras and NVRs over ONVIF or RTSP on your PoE network.

  • You set the rules

    Your team decides which cameras, zones and detections are active, and what counts as an alert.

Connect. Configure. Go live.

No camera replacement. Optara Systems works with the cameras and network you already have.

  1. Connect

    Link the cameras you already have

    We install a compact edge device on your network and connect it to your IP cameras and NVRs over ONVIF or RTSP.

    An existing wall-mounted IP camera, ready to connect to the Optara Systems edge device
  2. Configure

    Set the rules for your site

    Together we draw zones and lines, choose the detections for each camera and set alert rules that fit how your site runs.

    Optara Systems analysing a camera view of a glass-walled building, with a person detected on the mezzanine
  3. Go live

    Alerts, search and insights, 24/7

    Detections run on-site around the clock. Results appear in the Optara Systems console, and we keep tuning with your team.

    Live camera views checked on a tablet in a control room, once the site is live

Camera compatibility

Works with the cameras you already have.

Optara Systems connects to the IP cameras and NVRs already on your network. We confirm compatibility with you before anything is installed.

ONVIF / RTSP cameras from brands such as

  • ONVIF
  • RTSP
  • PoE
  • Hikvision
  • Dahua
  • Axis
  • Hanwha
  • Uniview
  • Existing NVRs

Questions, answered.

Still curious? Email contact@optarasystems.com.

Do we need new cameras?

No. Optara Systems works with the IP cameras you already have — any camera or NVR that supports ONVIF or RTSP connects straight to the Optara Systems edge device. We confirm compatibility before anything is installed.

Where is our video processed?

On-site. Analysis happens on the Optara Systems edge device on your network, so your camera streams aren’t sent off-site to be analysed. When something needs attention, the alert and a short clip appear in the Optara Systems console.

What can Optara Systems detect?

15+ AI detection models cover security (intrusion, tailgating, weapons, number plates and opt-in facial recognition), safety (PPE, slips and falls, medical emergencies; vape alerts come from integrated vape sensors) and operations (people and vehicle counts, queues, peak periods, heatmaps). You choose which run on each camera.

How fast are alerts?

Alerts appear in the Optara Systems console in under 2 seconds from detection, 24 hours a day, 7 days a week, with a short clip so your team can see what happened.

Who is Optara Systems for?

Organisations that already run CCTV and want more from it. Optara Systems is live in schools across NSW and Victoria and in manufacturing facilities in NSW, with solutions for retail, healthcare, construction, property and more.

Put your cameras to work.

See alerts, AI search and insights in the Optara Systems console, and talk through how it would fit your site.

  • ONVIF / RTSP cameras
  • AI runs on-site
  • No camera replacement